Blade CP - RC Helicopter

The Blade CP is a micro RC helicopter. It has a conventional main and tail rotor and uses a coaxial counter-rotating head. The model can be used right out of the box and can fly anywhere. There are enhancements kits that can allow for more advanced aerobatics and inverted flight capabilities. The helicopter will include a 4-in-1 receivers, mixer, electronic speed control system, main motor, radio system, gyro, and battery pack.

When Purchasing a RC Helicopter, Do You Prefer?

If you are a beginner then this model is not recommended. You will need to have used a flight simulator or trained with an experienced RC pilot. To fly the Blade CP properly you will need to understand the tail, elevator, aileron and collective controls as many adjustments are quite minute.

If a crash should occur then the throttle and trim will need to be lowered to prevent damage to the electronic system. It is important to take your time and be completely familiar with the controls and what to do to prevent damage if a crash should occur as there are different procedures depending on what mode you are flying in.

The Blade CP was designed to be flight ready right out of the box with no hassle. It is a very agile model mainly due to the collective/cycle pitch mixing. There are three micro servers that control all pitch rotor movements. This model can rival any higher priced helicopters and each model is test flown before packaging to ensure quality. The manual provides in detail instructions on how to use the helicopter.

This helicopter can be upgraded to a 3D or fully aerobatic helicopter so you do not have to change helicopter models as your flying improves and you try more advanced flying techniques. The transmitter for the Blade CP has an option of hooking up a second transmitter to use with instructors during training if you desire.